Click image to view full size image
REFRIGERATOR SIDE PANEL ROLLER FORMING MACHINE LINE（Enable U-shape Bending Forming）
U-SHAPE SHELL ROLLER FORMING MACHINE LINE
This line is special for refrigerator side panel roller forming which can be used for different products manufacturing in width and length, it has advantage for easy adjusting and operating;
The machine is composed by following parts: auto loading part→ punching machine→ 180°turn over→ roller forming section→ Z-L bending(Z for U bending and L for end 90°shape), and other parts like pneumatic system and electric control system etc.
 |
 |
Main technical parameters:
■ Outline dimension of forming line (reference):
About 42000×3500×1500
■ Height for worktable: 900mm from ground
■ Stations: 6
■ Dimensions of the applied sheets:
Length: 1400～4200mm, width: 500～650mm,
Thickness: 0.4～0.6mm
■ Width of product：560~780
■ Cycle time: 35-40s/piece（U shape）
20-25s/piece(single )
■ Applied raw material: Pre-paint sheet (PCM)
VCM sheet, cold-rolled plate
■ Dimensions of the U-shape shell:
Height: 500～1800mm
Width: 450～700mm
Depth: 450～600mm
■ Power supply: about 30kVA(380v 50HZ)
■ Air supply: 0.5-0.65Mpa
■ Water supply: industry tap water
http://www.hztiptop.com/